Foundation Loading: Introduction
This chapter introduces the subject of foundation loading....
Foundation Loading
This chapter discusses the tabulation of foundation loading data in Microsoft Excel....
Load Resistance Factor Design
This chapter discusses the tabulation of load resistance factor design data in Microsoft Excel....
Two-Way Slab Loading
This chapter includes drawings pertaining to two-way slab loading....
LRFD Compared to Working Strength Loads: Introduction
This chapter introduces the subject of load resistance factor design as compared to working strength loads....
LRFD Compared to Working Strength Loads
This chapter contains examples used to demonstrate the design of footings to resist seismic loads....
Strength Design in Aluminum
A Review of Three Codes
Prepared by the Task Committee on Strength Design in Aluminum of the Committee on Special Structures of the Committee on Metals of the Structural Engineering Institute of ASCE. ...
Analysis of Dynamic Laterally Loaded Pile in Clay
Deflections of laterally loaded pile groups are strongly affected by the degree of pile head fixity. If the cap provides perfect restraint against rotation, deflections are only about...
Tying It All Together
The Rancocas Greek Bridge, a steel tied arch designed for both light-rail and freight train loading, may be the first bridge of its kind to carry freight trains in the United States....
Micropiles to the Rescue
When a Michigan energy concern began upgrading the equipment in one of its operating power plants, engineers were asked to find an economical and nondisruptive way to support the new loads...
Fundamentally Sound
Through careful coordination of remediation work that will include the dredging of contaminated sediment and the control of storm water, a busy Seattle shipyard is charting a course for...
Flexural Behavior of Slender Post-Tensioned Masonry Walls
The 2002 edition of the Masonry Standards Joint Committee (MSJC, 2002) design provisions for masonry structures includes a chapter on the design of post-tensioned masonry (PTM) walls with...
Detailing and Design Examples for Torsional Members
The nature of the internal force flow in a concrete member subject to torsion brings about both longitudinal and transverse force components. The resulting tension brought about by the...
Symbol of Strength
Shortly after the Oklahoma City bombing, the federal government decided to rebuild. The result is an architectural gem incorporating the latest advances in blast resistance and sustainable...
Power Shift
Engineers designing a Manhattan skyscraper with offices in the lower floors and residences in the upper found that they had to employ several unusual methods to accommodate client needs....
The Pentagon Report
The findings of the building performance study conducted following the September 11, 2001, terrorist attack on the Pentagon have far-reaching implications for the engineering and building...
Atmospheric Corrosion Resistance of Structural Steels
The main objective of this paper is to provide engineers with data on thickness loss of structural steel members resulting from corrosion. To this end, the writers have collected atmospheric...
Assessing Long-Term Pollutant Concentration Trends in Urban Runoff for TMDL Planning and Regulatory Assessment
Loads of some pollutants in many urban watersheds include a substantial component originating with non-point sources and stormwater runoff. TMDL planning includes estimating those loads,...
Nonionic Organic Solute Sorption to Two Organobentonites as a Function of Organic-Carbon Content
Sorption of three nonionic organic solutes (benzene, trichloroethene, and 1,2-dichlorobenzene) to hexadecyltrimethylammonium-bentonite (HDTMA-bentonite) and benzyltriethylammonium-bentonite...
Monitored Natural Recovery and Dredging Decision Analysis at Bellingham Bay, Washington
The Whatcom Waterway Site, located within inner Bellingham Bay, Washington consists of intertidal and subtidal aquatic lands within and adjacent to the Whatcom Waterway in Bellingham,...
Return to search